What to Check When Buying a Flat Weight Bench

What to Check When Buying a Flat Weight Bench

Before you buy a flat weight bench for your gym, look for more than just a pretty piece of equipment. There is a large amount of difference between a good quality flat bench and a flimsy one that will not last long.

Weight Rating and Safety Margin

Weight Rating (in kg) + Safety Margin = The Specified Weight (in kg). For example, your bodyweight plus the weight of the loaded barbell. If you weigh 85kg and bench 100kg then the weight rating of the bench must be greater than 185kg. Ideally it should be greater than 185kg x 1.5 = 278.75kg. A bench that is rated to your total combined weight (in kg) of body plus bench then provides no safety margin at all.

Frame Construction and Joints

Most important for the frame are the welded joints. A frame with bolted brackets will tend to develop creaks and start to wobble after some time. The gauge of the steel tubing is also very important. While two weight benches may look similar, the thicker walled tubes (often specified in mm in the detailed specifications) are far better at withstanding bending and twisting under load than their thinner walled counterparts.

Pad Density, Thickness and Width

For the weight bench’s press pad, test the foam’s density by pressing your hand down into it. It should give way some under pressure but then go back to its original form, and shouldn’t collapse flat onto the frame’s metal. The pad’s thickness is also important, and ideally it should be around 10-13cm thick or greater. But the pad’s width is just as important, and it must be wide enough to support your body’s back when you’re in the proper position for the exercise. Shoulder blades should be pressed flat onto the pad’s surface, which usually means a width of greater than 28cm.

Base Footprint and Stability

A narrow base can save precious space between kit but it’s also a potential kiss of death for stability. Check the distance between the front and back of the footprints as well as the width of the base as a whole. Ideally a bench is going to be most stable on a wide footprint. Test out a bench on the floor you intend to place it on and try to rock it from side to side. If it wobbles around on a flat surface then expect it to be even worse under load on one side.

Bench Height and Leverage

Black padded flat weight bench with square steel legs and rubber feet on a gym floor

As for the optimal height of a flat bench, the standard ones are between 40 and 45 cm high. If a bench is too high for you then you will have problems with your feet not being able to touch the floor. This in turn will cause you to lose some of the leg drive that is required to complete a press safely. On the other hand, a bench that is too low for you will cause you to have your back locked and have an abnormal bar path. So, try sitting on the bench before you purchase and make sure your feet are flat on the floor and your knees are roughly at hip level. See also Flat weight benches sold by Rep Fitness.

Feet and Floor Contact

Check the type of feet the bench has. Are they rubber or non-slip textured? If you’re planning to put your new bench on a garage floor or on laminate floors then rubber non-slip feet are a must to check for. You don’t want a set of hard plastic feet that will slide on smooth surfaces and possibly mark your wooden or vinyl floors.

Warranty Length and Coverage

It’s also important to know what the warranty covers and how long any parts of the bench will be covered for, such as the frame, and the upholstery and padding separately for 1-2 years. Also it’s worth checking that the bench you have chosen to purchase will meet the basic UK product safety requirements for fitness equipment, to avoid any future disputes over the bench’s quality should you need to make a warranty claim.

Portability and Storage

Many benches feature built-in wheels or handles to aid in transportation. Without these features, the bench could be a permanent fixture in your gym, especially if it’s difficult to lift. A good weight bench can be used for years to come, so make sure it can be moved easily when needed.

When comparing different weight benches, compare the specifications side by side. It makes for a better comparison when the benches are sat next to each other. Flat weight benches are listed with their specifications on the Rep Fitness website.

A flat bench is a long-term piece of gym equipment. Take a little time to check the frame, the pad(s) and the base of the bench before you buy it. It could save you a lot of discomfort later!

Leave a Reply

Your email address will not be published. Required fields are marked *